Protocol for cell lysis using NEBExpress E. coli Lysis Reagent (NEB #P8116)

  1. If monitoring cell density by OD600, record final OD readings prior to harvesting.

  2. Harvest cells by centrifugation at 16,000 x g for 10 minutes. For larger volumes, centrifuge for ≥30 minutes especially if at ≤10,000 x g. Discard the medium and, if necessary, weigh the wet cell pellet. 

  3. Store the pellet at -20°C or -80°C or process immediately.

  4. Resuspend the cell pellet in NEBExpress E. coli Lysis Reagent by pipetting or vortexing briefly until the suspension is homogenous:

    • Use 0.025 - 0.075 mL of NEBExpress E. coli Lysis Reagent for every 1 UOD600 harvested.  To calculate the UOD600, multiply the volume harvested by the OD600 reading.  
      For example, a 5 mL culture harvested at OD600 1 gives 5 mL x 1.0 = 5 UOD600. In this example, 0.125 – 0.375 mL Lysis Reagent is required to lyse efficiently.

    • If harvested cells are weighed, use 5 mL of NEBExpress E. coli Lysis Reagent per 1 gram of cells.

  5. Incubate the resuspended cells at room temperature for 10 - 20 min with gentle shaking, gentle rotation, or swirling. Lysis is usually visible with a clearance of the suspension.

  6. Centrifuge the lysate at 16,000 x g for 10 min at 4°C to pellet the insoluble material and cell debris (30 min or longer for large volumes and lower speed).

  7. Carefully transfer the supernatant into a sterile container for analysis or purification. This soluble fraction can be stored at 4°C for a few hours or -20°C or -80°C for longer term storage. 

  8. If needed, resuspend the insoluble pellet in 50 mM Tris-HCl pH 7.5 or any desired buffer for analysis or purification of inclusion bodies.


  • A sample of the soluble fraction or resuspended insoluble fraction can be analyzed by SDS-PAGE. For 100 µl lysate with 1 UOD600 of cells , mix 20 µL of the fraction with 10 µL of 3x SDS Blue Loading buffer (NEB# B7703S). After heating 2 min at 95°C, the denatured proteins can be analyzed on SDS-PAGE by loading 10 to 20 µL per well or be stored at -20°C until analysis.

  • The Lysis Reagent can efficiently lyse E. coli using up to 10 µL for 1 UOD600 of cell pelleted, which is is equivalent to 30 mL of Lysis Reagent for 1 L of cells at OD600 ~3. Beyond this ratio, the cell suspension will be too dense to  lyse efficiently.
  • Protease inhibitors can be added if needed.