Transformation Protocol (M0370)
OverviewChemically competent strains of E. coli (commercially available or prepared by user) can be transformed by ligation products prepared using the Instant Sticky-end Ligase Master Mix. Electrocompetent cells are not compatible. Users of competent cells from other vendors may need to dilute ligation reactions 4-fold, prior to transformation, in order to achieve maximum transformation efficiency. Not all cells from other vendors will benefit from this additional step. The following protocol is recommended by NEB. Other protocols can be used but the volume of ligation reaction used should not exceed 5 μl reaction per 50 μl cells.
- Thaw competent cells on
- Aliquot 50 μl of cells into a 1.5 ml
- Add 2 μl of the ligation reaction to the
cells and mix by finger-flicking. Do not vortex the tube.
- Incubate the tube on ice for 30 minutes.
Do not mix.
- Heat shock at 42°C for 30 seconds, return
tube to ice for 2 minutes.
- Add 950 μl recovery media (e.g. SOC) to
the tube and incubate for one hour at 37°C with rotation or shaking (200–250
- Spread 100 μl of the outgrowth (undiluted
or diluted 1:5 with recovery media) onto appropriate antibiotic selection plates
and incubate overnight at 37°C.
Transformation efficiencies around 2 x 106 cfu/µg are typically achieved for recombinant cohesiveend substrates (vector + insert), using cells with a 7 x 108 calculated efficiency with uncut DNA. This corresponds to several hundred colonies on a plate when 100 μl of a 1 ml outgrowth is plated at a 1:5 dilution. As with all ligation and transformation protocols, many factors affect the calculated transformation efficiency, including purity and integrity of DNA ends, competence of the cells being transformed, media choices, incubation temperatures and times and biological effects (intact ORF in high-copy vector, toxic genes, etc.).