• My NEB
  • Print
  • PDF
  • Amylose Resin

    Description

    An affinity matrix used for the isolation of proteins fused to maltose-binding protein. It is intended for use in a gravity flow column.

    Properties and Usage

    Storage Temperature

    4°C

    Storage Conditions

    20% Ethanol

    Binding Capacity

    7-10 mg MBP5* -paramyosin δSal fusion protein/ml amylose resin.

    Can be Regenerated

    yes

    Notes

    1. Store at 4°C. After use, resin should be stored in column buffer plus 0.02% sodium azide or 20% ethanol.
    2. Amylose Resin column should be washed with 5 volumes of column buffer before each use.
    3. For optimum performance, load crude extract at < 60 cm/hour.
    4. When regenerating the column at 4°C, please note that 0.1% SDS can precipitate at that temperature. It is therefore recommended that the SDS solution be stored at room temperature until needed. The resin may be generated up to five times.
    5. For a complete affinity purification protocol, download the pMAL Protein Fusion and Purification System technical bulletin (NEB #E8200) from www.neb.com.
    6. Regeneration: The packed resin may be regenerated by the following wash sequence: Water 3 - column volumes, 0.1% SDS - 3 column volumes, Water - 1 column volume, Column Buffer - 5 column volumes.

    Supporting Documents

    Material Safety Datasheets

    The following is a list of Material Safety Data Sheets (MSDS) that apply to this product to help you use it safely. The following file naming structure is used to name these document files: [Product Name] MSDS. For international versions please contact us at info@neb.com.

    Datacards

    The Product Summary Sheet, or Data Card, includes details for how to use the product, as well as details of its formulation and quality controls. The following file naming structure is used to name the majority of these document files: [Catalog Number]Datasheet-Lot[Lot Number]. For those product lots not listed below, please contact NEB at info@neb.com or fill out the Technical Support Form for appropriate document.